manualshive.com logo in svg

Stryker 7205-000-000, Инструкция по эксплуатации

Поделиться
Скачать
Stryker 7205-000-000 Скачать руководство пользователя страница 3

7205-001-700 Rev-AA

EN

www.stryker.com

3

•  Upon initial receipt and before each use, operate 

the equipment and inspect each component for 
damage. DO NOT use any equipment if damage 
is apparent. See the 

Heavy Duty Care Instructions

 

manual for inspection criteria.

•  DO NOT use this equipment in areas in which 

flammable anesthetics or flammable agents are 
mixed with air, oxygen, or nitrous oxide.

•  Take special precautions regarding electromagnetic 

compatibility (EMC) when using medical electrical 
equipment. Place this equipment into service 
according to the EMC information contained in this 
manual. Portable and mobile radio frequency (RF) 
equipment can affect the function of this equipment.

•  DO NOT stack or place equipment adjacent to 

the product. If such a configuration is necessary, 
observe the configuration to ensure that 
electromagnetic interference does not degrade 
performance.

•  DO NOT use the product in a magnetic resonance 

imaging (MRI) environment. Using the product in an 
MRI environment could affect the function of the 
system. 

Accessories

WARNINGS: 

•  Use only Stryker-approved system components and 

accessories, unless otherwise specified. DO NOT 
modify any system component or accessory. 

•  Using other electronic components and accessories 

may result in increased electromagnetic emissions 
or decreased electromagnetic immunity of the 
system. 

•  DO NOT reuse, reprocess, or repackage a device 

that is intended for single use only.

 

-

A single use device may not withstand 
chemical, chemical vapor, or high temperature 
sterilization reprocessing. 

 

-

Design features may make cleaning difficult. 

 

-

Reuse may create a contamination risk and 
compromise structural integrity resulting in 
operational failure. 

 

-

Critical product information may be lost during 
repackaging.

Failure to comply may lead to infection or cross 
infection and result in patient and/or healthcare staff 
injury.

NOTES: 

•  A variety of attachments are available for use with 

this handpiece. Each attachment has a specialized 
retainer for wires, pins, tools and/or cutting 
accessories. See the 

Heavy Duty Rotary Handpiece 

Attachments Instructions For Use

 manual for specific 

attachment and accessory instructions.

•  For a complete list of accessories, contact your 

Stryker sales representative. Outside the US, 
contact your nearest Stryker subsidiary.

Содержание 7205-000-000

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды