Stryker 6516, Руководство по эксплуатации

Страница: 54 / 70

C Clle ea an niin ng g tth he e cch ha arrg ge err
W WA AR RN NIIN NG G
• Always wear insulated rubber gloves, in addition to personal protective equipment, when cleaning the S SM MR RT T Pak to
reduce the risk of injury.
• Always disconnect the S SM MR RT T charger from the wall outlet before cleaning to avoid the risk of electrical hazards.
• Do not spray fluid directly onto the S SM MR RT T charger.
• Do not power wash the S SM MR RT T charger.
• Do not use solvents, lubricants, or other chemicals to clean the S SM MR RT T charger unless otherwise directed.
• Do not immerse the S SM MR RT T charger in water or allow water to collect on top of the S SM MR RT T charger to avoid the risk of
electric shock.
To clean the S SM MR RT T charger:
1. Disconnect the S SM MR RT T charger from the wall outlet to avoid electrical hazards during cleaning.
2. Wipe surfaces of the S SM MR RT T charger with a soft cloth dampened with a non-abrasive, hospital disinfectant.
3. Wipe with a cloth moistened with clean water to remove any cleaning chemicals or residue.
4. Dry thoroughly before placing the S SM MR RT T charger back into service.
C Clle ea an niin ng g tth he e b ba atttte erryy
The S SM MR RT T Pak is designed to be power washable. The preferred method for power washing the S SM MR RT T Pak is with the
standard hospital surgical cart washer or hand held wand unit.
W WA AR RN NIIN NG G
• Always use any appropriate personal protective equipment while power washing to avoid inhaling contagion. Power
washing equipment may aerate contamination.
• Always wear insulated rubber gloves, in addition to personal protective equipment, when cleaning the S SM MR RT T Pak to
reduce the risk of injury.
• Always use only non-conductive materials to wipe the S SM MR RT T Pak.
• Always avoid excessive water exposure to the S SM MR RT T Pak terminals.
• Always refer to the disinfectant’s Material Safety Data Sheet (MSDS) to verify the pH range. Disinfectants with pH levels
higher than 10.5 may cause the S SM MR RT T Pak housing material to crack.
• Do not directly handle or make contact with the S SM MR RT T Pak terminals while cleaning to avoid the risk of injury.
• Do not immerse the S SM MR RT T Pak in liquid to reduce the risk of electric shock.
• Do not use solvents, lubricants, or other chemicals to clean the S SM MR RT T Pak unless otherwise directed.
C CA AU UT TIIO ON N
• Do not steam clean or ultrasonically clean the S SM MR RT T Pak.
• Do not exceed 180 °F/82 °C as the maximum water temperature.
• Do not exceed 240 °F/115 °C as the maximum air dry temperature (cart washers).
• Do not exceed 1500 psi (130.5 bar) as the maximum water pressure. If you use a hand held wand to wash the product,
keep the pressure nozzle at a minimum of 24 in. (61 cm) from the product.
To clean the S SM MR RT T Pak:
1. Remove the S SM MR RT T Pak from the P Po ow we err--P PR RO O cot or S SM MR RT T charger.
2. Inspect the S SM MR RT T Pak housing and terminal area for any cracks or damage.
3. Clean the S SM MR RT T Pak with a hospital grade disinfectant with a pH range of 6.5 to 10.5.
4. Rinse the S SM MR RT T Pak thoroughly with clean water to remove any cleaning chemical or residue. Position the S SM MR RT T Pak
to avoid water from pooling near the terminals.
5. Dry the S SM MR RT T Pak thoroughly before insert the S SM MR RT T Pak into a P Po ow we err--P PR RO O cot or S SM MR RT T charger.
EN 50 6516-209-001 Rev D.0