manualshive.com logo in svg

Stryker 6100 Rugged M1, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Stryker 6100 Rugged M1 Скачать руководство пользователя страница 11

Cot Fastener Installation

1–10

The Stryker Model 6372 and 6373 Cot Fastener systems are designed to be compatible only with cots which
conform to the installation specifications listed on page 1–11.  Ambulance cots which currently meet these
specifications are:

Stryker

Model 6100 M1 Roll–In System

Ferno–Washington

Model X–2*

WARNING

It is the responsibility of the cot operator to ensure that the cot being used in the Stryker Model 6372 or 6373
Cot Fastener Systems meets the installation specifications listed on page 1–11.  Injury may result if a non–
compatible cot is used in the Stryker Model 6372 or 6373 Fastener System.

For more detailed installation and operation instructions for the Stryker Model 6372 and 6373 Cot Fastener
systems, refer to part number 6372–90–11 Rugged

t

 Cot Fastener Installation/Operation Instructions.

  

ATTENTION

The Model 6100 Ambulance Cot, in combination with the Model 6372 or Model 6373 Cot Fastener Systems,
are designed in accordance to BS EN 1789, Medical Vehicles and their Equipment – Road Ambulances.  The
Cot Fastener System must be installed by qualified personnel to be in conformance to this standard.  1/4”
steel backing plates (or the equivalent) are recommended beneath the mounting surface (ambulance floor
or tray system) at all mounting points.  Before putting the system into service, test the installation using BS
EN 1789 as a minimum.

* Stryker is not responsible for changes in specifications to other manufacturer’s cots.

Содержание 6100 Rugged M1















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды