Stryker 3500-000-681, Руководство по эксплуатации и техническому обслуживанию

Страница: 24 / 64

C CA AU UT TIIO ON N -- Always confirm stable foot placement and back support or get assistance from another person to avoid the
risk of injury or product damage.
4. Grasp the foot (B) and turn counterclockwise to unscrew and remove the foot (Figure 7). Discard the foot.
5. Reverse steps to reinstall.
6. Verify proper operation before you return the product to service.
C Cu ussh hiio on n rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• None
P Prro occe ed du urre e::
1. Pull the handle on the front of the bench to slide out the sleeper pullout.
2. Grasp the back of the cushion and unfold to open the full cushion (Figure 8).
3. Lift the cushion and drape over the back to expose the seat frame.
4. Reach through the seat frame and unsnap the four cushion retainer straps (A) from the back frame to remove the
cushion (Figure 9). Discard the cushion.
5. Reverse steps to reinstall.
6. Verify proper operation before you return the product to service.
F Fiig gu urre e 8 8 –– U Un nffo olld d ccu ussh hiio on n
A
F Fiig gu urre e 9 9 –– C Cu ussh hiio on n rre etta aiin ne err ssttrra ap p
T Trra acckk rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• #3 Phillips screwdriver
P Prro occe ed du urre e::
1. Pull the handle on the front of the bench to slide out the sleeper pullout.
2. Using a #3 Phillips screwdriver, remove the four screws (two on each side) (C) that secure the track to the sleeper
pullout and roll the sleeper pullout out of the way (Figure 7). Save the screws.
3. Using a #3 Phillips screwdriver, remove the four screws (two on each side) (D) that secure the track to the bench frame.
Save the screws.
EN 20 3504009001-A