Stryker 0240-031-000, Руководство пользователя

Страница: 6 / 32

4
• Federal law (United States of America) restricts this device to sale by, or on the order of, a
physician�
• To avoid risk of electric shock, use only the hospital-grade power cord furnished with the
display and/or transmitter� Disconnect the display and/or transmitter from the power supply
to make connections or to inspect the equipment�
• To avoid the risk of electric shock, this equipment must only be connected to a supply mains
with protective earth�
Cautions
• Plug the AC adapter into a grounded power outlet�
• Connect the devices to a hospital grade receptacle to achieve grounding reliability�
• To connect to an international power supply, use an attachment plug appropriate for the
power outlet�
• Do not position the devices so that it is difficult to disconnect the power cords from the
supply mains�
• Power off the devices when they are not in use�
• Remove the power cord when transporting the transmitter�
• Unplug the display and transmitter if they are not to be used for an extended period of time�
• Never operate the devices immediately after transportation from a cold location to a warm
location�
• Pay close attention to the care and cleaning instructions in this manual� A deviation may
cause damage�
• Do not install the devices near sunlight, excessive dust, mechanical vibration, or shock�
• Keep the devices away from equipment that uses strong magnets (i�e�, large loudspeakers)�
• Do not touch the patient with signal input or output connectors� Equipment with SIP/SOP
connectors should either comply with IEC 60601-1 harmonized national standard or the
combination should be evaluated for safety�
• Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the devices�
Note: This device has been tested and found to comply with the limit for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
device generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. There is no guarantee that interference will not occur in a particular
installation, which can be determined by turning the device off and on.