Stryker Medical RUGGED 6080 MX-PRO Скачать руководство пользователя страница 8

Страница: 8 / 73

Set–Up Procedures

Unpack the cartons and check all items for proper operation. It is important that the

Cot is

working properly before it is put into service. Have a qualified service person use the following list and the
operation instructions to check the cot before it is put into service.

All fasteners secure (reference all assembly prints)

All welds intact, not cracked or broken

No bent or broken tubing or sheet metal

No debris in wheels

All wheels secure, rolling and swivelling properly

Siderails move and latch properly

Backrest operating properly

Optional accessories intact and operating properly

Height positioning latch functioning properly

Cot secure in each height position

Undercarriage folds properly

Break–away head section operating properly

Safety bar operating properly

Foot rest operating properly

No rips or cracks in mattress cover

Body restraints intact and working properly

Wheel lock operating properly (optional equipment)

Does the vehicle safety hook engage the safety bar so that the cot loads and unloads easily from the ve-
hicle?

Is there an approved crash–stable fastener (Stryker part number 6370/6374 or 6371/6375 – not included)
installed in the vehicle?

The patient compartment of the vehicle in which the

Cot will be used must have:

A smooth rear edge for cot loading.

A level floor large enough for the folded cot.

Stryker 6370/6374 or 6371/6375 crash stable cot fastener (not included).

33” (84 cm.) maximum loading height.

Space to install the safety hook.

When necessary, modify the vehicle to fit the cot. Do not modify the cot.

WARNING

Do not modify the

Cot. Modifying the cot can cause unpredictable operation resulting in inju-

ry to the patient or operator. Modifying the cot will also void its warranty (see page 4).

Содержание RUGGED 6080 MX-PRO










































































Результаты поиска

Содержание RUGGED 6080 MX-PRO

Отзывы:

Бренды по названию

Популярные бренды

Stryker Medical RUGGED 6080 MX-PRO, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание RUGGED 6080 MX-PRO

Отзывы:

Бренды по названию

Популярные бренды