Struers Unitom-50, Инструкция по эксплуатации

Страница: 6 / 225

Unitom-50
Instruction Manual
2
1. Getting Started
In the packing box you should find the following parts:
1 Fork spanner 30 mm, for changing the cut-off wheel
1 Grease gun, for lubrication of tilting frame bearings and
oscillating table.
2 Cover plugs for threads for cutting tables
1 Set of Instruction Manuals
1 PVC hose 1/2", 2 m
1 Outlet hose, 2 m
1 Drain elbow pipe, 15
°
5 Hose clamps
The kit also contains the below parts exclusively for Unitom-2/-5
1
38 mm drain hose
1
87 ° elbow drain fitting
1 32-50 mm hose clamp
Unitom-50 should be placed on the optional Struers table
(LABUL), or a table that is able to carry a weight of min. 200 kg.
Adjust the table height using the screws in the table legs. It is
important that both the table and Unitom-50 are level. Place
Unitom-50 on the table. If the machine is not level, adjust the
height for each corner, as follows:
„
Loosen the upper 13 mm nut under the corner screw.
„
Adjust the lower 8 mm nut with a spanner.
„
Re-fasten the upper 13 mm nut again.
„
Repeat the adjustment for each of the other three corners until
Unitom-50 is levelled.
A 65 mm hole must be drilled in the base of the table for
attachment of the outlet hose.
(see drawing 15317049 in the Spare Parts manual).
Checking the Contents
of Packing
Recirculation Cooling Unit
Placing Unitom-50
Placing Unitom-50 on a table
other than LABUL