Struers Unitom-2, Инструкция по эксплуатации

Страница: 18 / 122

Unitom-2
Instruction Manual
14
The following table shows possible answers to a number of common
questions:
Optimising the Cutting Results
Question Answer
How can I avoid discoloration
or burning of the sample?
Apply a lower cutting force
Change the cut-off wheel as the
hardness of the present cut-off wheel
may be inappropriate for the hardness of
the workpiece*)
How can I avoid burrs? Use a softer cut-off wheel*)
In case extra cutting table (optional) and
extra quick-clamping device (optional) is
mounted:
Clamp the workpiece securely at the right
hand clamping device
Tighten the left hand clamping device
just enough to prevent the workpiece to
shifting on being cut
How can I avoid the cut-off
wheels wearing too quickly?
Apply a lower cutting force or use a
harder cut-off wheel*)
How can I achieve faster
cutting?
Place the workpiece in a direction which
allows the cut-off wheel to cut the
smallest possible cross-section. Apply a
higher cutting force
*) Please refer to the Selection Guide in the
Struers Cut-off Wheels brochure.
Optimising the Cutting Results