11
INSTALLATION: DISPLAY CASE START-UP
16. Display Case Start-Up
When power is supplied, turn on lights. The
light switch is located on inside of case at top
right, from case rear. See illustrations below.
All lights should come on at same time. First
Light Switch
time lighting may require a short warm-up
period for the bulbs. Slightly dim or a flickering
of new bulbs is normal.
The lighting is wired in series so
all lights must
be plugged in or receptacles capped
for case
lights to turn on.
Cap
Plug
Receptacle
Raceway Receptacle, Plug and Cap
Raceway
