background image

 

 

 

12 

TECHNICAL PASSPORT, INSTALLATION AND MAINTENANCE MANUAL

 

 

10

 

WARRANTY APPLICATION 

 

For the general manager of JSC “STROPUVA IR KO”  

I ...........................................................……………………………...., purchased in your company manufactured 
(name, surname or company name) product: ...............................................,......................…....................      
manufacture no. ..........……..............................…………................... (product name) (date of manufacture) 
………………………………………………..,..…………………………………..…,………………….………………….……………………........ 
(date of purchase, location, purchase document name and number)  

After studying product’s technical passport, I declare that product was installed according to 
requirements presented in manufacturer’s technical passport and it’s intended us, without breaching 
the requirements of user’s manual. With respect to that, I have a complaint concerning this product: 
……………………………………………………………………..….…………………….………………………………………..…………………….
……………………………………………………………………………………………………………………………………………………………….
………………………………………………………………………………………………………..……………………………………………………..
……………………………………………………………………………………………………………..……………………….……………………….
……………………………………………………………………………………..……………………….……………………………………………….
………………………………………………………………………………………..……………….…………………………………………………….
……………………………………………….……………………………………………………..……………………………………………………….
……………………………………………………………………………………………..….…………………………………………………………….
………………………………………….……………………………………………………………………………………………………………………
……………………………….……………………………………………………………………………………………………………………………… 

I believe that shortcoming listed in the complaint were caused by defects of your product. I ask you to 

send your representatives to inspect the connected device, to determine and remove the defects. If it 

will be found that mentioned defects were caused by inappropriate installation or use of device or if 

there are no warranty covered faults, I commit to refund the expanses of transportation (0,25 Eur/km) 

and time spent during travel and inspection (9 Eur/h), for your representatives, for each worker of the 

service crew (not more than for three workers). 

If I do not reimburse the indicated expenses in good faith within 7 calendar days, I agree that they 

would be recovered from me in accordance with the procedure established by the laws of the Republic 

of Lithuania. 

My address……………………………………………......................……….....................................................................  

Telephone ………...…………….…………………………………………………………………………………………………………………… 

...................................... 

 

 

 

............................................... 

Name, surname  

 

 

 

 

Signature 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Содержание Pellet















Отзывы: