Page of 12
4
ASSEMBLY
1. Attach the front axle assembly (H) to the front frame (F) using four M8 x 20mm carriage bolts
(CC), four M8 lock nuts (JJ), and four M8 washers (FF). Attach the outer ends of the steering
linkage using two M6 x 20mm shoulder bolts (EE), M6 lock nuts (LL), and M6 washers (MM), as
shown in Fig. 1.
Hand tighten all bolts until after Step 2.
Fig. 1
F
H
CC
FF
MM
LL
JJ
EE
Hardware Used
CC
x 4
M8 Flat
Washer
JJ
M8 Lock Nut
x 4
M8 x 20mm
Carriage Bolt
x 4
LL
M6 Lock Nut
x 2
MM
M6 Flat Washer
x 2
FF
x 2
M6 x 20
Shoulder Bolt
EE
2. Attach the front struts (G) to connect the front axle assembly (H) to the front frame (F) using
four M8 x 20mm carriage bolts (CC), using four M8 lock nuts (JJ), and four M8 washers (FF), as
shown in Fig. 2. Tighten all bolts from Step 1 and Step 2 securely.
Fig. 2
Hardware Used
G
G
H
F
CC
CC
CC
CC
x 4
M8 Flat
Washer
JJ
JJ
FF
M8 Lock Nut
x 4
M8 x 20mm
Carriage Bolt
x 4
FF
FF
JJ
