Page 7 of 12
3.
Rotate the knuckle (18) to the hex connector (6). Rotate the gooseneck (8) to the other end of
knuckle (18). Seat the other end of gooseneck into the back plate (9). Then
rotate the set screws
(15) in the back plate to attach the gooseneck (8) into place.
Attach the back plate to driver box
(11) by M4x12 screw (16).
Note: wrap each of the threads with PTFE thread seal tape (20).
4.
Attach the black fixture wire to the
“-” wire of the driver (12) and the white fixture wire to the “+”
wire of driver (12), using wire nuts (25) provided.
5.
Attach the
“N” wire of driver (12) to the neutral wire and the “L” wire of driver (12) to the live wire
using wire nuts (25) provided.
6.
Connect the green wire to the grounding screw in the junction box.
7.
Attach the driver box (11) back to junction box by #8-32 screws (14). (You can also use tapping
screws (21) and wall plugs (22) for attaching.)
Refer to the mounting sketches on the next page. By choosing different parts, you can create
different assemblies.
