Page 10 of 15
Before Each Use
⚠
WARNING
Be sure parts are not damaged.
Be sure all parts are secure
Operating Instructions
⚠
WARNING
Electric shock hazard. Do not expose the unit or the plug to water or rain. Do not use the fan near
a water source such as a swimming pool, bathtub, or shower.
Be sure the fan is properly grounded.
Do not use this fan with any solid state speed control device.
Only plug the unit into a power outlet with the same voltage as rated voltage of it.
Rotating blade hazard. Keep hands clear to avoid serious injury.
Do not operate in the presence of explosive and/or flammable fumes.
Do not plug/unplug the fan into/from the electrical outlet while wet or standing in a wet or damp
area.
Never operate the fan without the guard in place.
For indoor use only. Do not use outdoors. Do not place the fan in or near a window. Rain may
create an electrical hazard.
Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized
service facility for repair before resuming operation.
Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings.
Do not place cord under furniture or appliances. Arrange cord away from a higher traffic area and
where it will not be tripped over.
1.
Plug fan into grounded power outlet.
2.
Direct fan to area of desired air flow. Select speed for cooling.
TO ADJUST AIRFLOW UPWARD OR DOWNWARD:
Loosen the POSITION SCREW first, and then loosen the PIVO NUT. Tilt fan head to the desired
angle then firmly tighten the PIVOT NUT first, then tighten the POSITION SCREW.
TO MAKE THE FAN OSCILLATE:
To oscillate the fan, pull CONTROL POST upward till it clicks
into place. (See arrow in Figure 1.)
