3
2. Raise the
chest support
cam lever
(
Photo 7
) and adjust the chest
support to a comfortable position.
Then push down on the cam lever to
the locked position.
Photo 7
Chest Support
Cam Lever
Photo 8
Arm
Support
Cam Lever
3. Flip the
arm support
cam lever to the unlocked
position and adjust the arm support to a horizontal
position then flip the cam lever to the locked position,
see
Photo 8.
STEP 2: ADJUSTING THE SEAT
The seat can be adjusted to one of three different
positions, the lowest one being the locked position and
two positions with less of an angle
.
A. Before you are able to adjust the seat position, you
must unlock the seat. There is a chair seat push
button protruding through the bracket under the seat.
Push in on this button until you can lift the front of the
seat up, exposing the seat adjustment plate that is
held against the bottom of the seat by Velcro
TM
.
See
Photo 9.
B. Pull the seat adjustment plate free from the Velcro
TM
so that it hangs down from the seat plate.
There are two sets of notches in the adjustment plate that will mate with the ‘T’ shaped opening in
the seat rail, as shown in
Photo 9
. Choose a position in the seat adjustment plate, insert the
adjustment plate into the ‘T’ shaped opening to the desired position and slide it forward so it
engages the seat rail. You can also use the seat in the locked position.
WARNING: BE SURE THAT THE SEAT ADJUSTMENT PLATE IS ENGAGED WITH THE SEAT
RAIL SECURELY AND FULLY SEATED AGAINST THE FRONT EDGE OF THE ‘T’ SHAPED
OPENING. AN INCORRECTLY INSTALLED SEAT ADJUSTMENT PLATE COULD CAUSE THE
SEAT TO BE UNSTABLE, POSSIBLY RESULTING IN PERSONAL INJURY.
