StrongLink SL060, Руководство пользователя

Страница: 8 / 15

StrongLink SL060
http://www.stronglink-rfid.com
8
Table 2
Status Description
0x00 Operation successes
0x01 NFC connect fails
0x0A Operation fails
0x0B Command is not supported
0x0C Parameter is error
0x0D No cards
0x0E RF base station is damaged
0x14 Searching card fails
0x15 Reset card fails
0x16 Verifying key fails
0x17 Reading fails
0x18 Writing fails
4-4. Command List
4-4-1 System Function Command
4-4-1-1. Set baud rate
0xAA
0xBB Len DeviceID 0x01 0x01 Data Checksum
Data: 0x00: BaudRate = 4800
0x01: BaudRate = 9600(default)
0x02: BaudRate = 14400
0x03: BaudRate = 19200
0x04: BaudRate = 28800
0x05: BaudRate = 38400
0x06: BaudRate = 57600
0x07: BaudRate = 115200
After changing the BaudRate, further communication must be set as the new BaudRate.
Response:
0xAA
0xBB Len DeviceID 0x01 0x01 Status Checksum
Status: 0x00: Operation succeed
0x0C: Parameter error
4-4-1-2. Initialize the Device ID
0xAA
0xBB Len DeviceID 0x02 0x01 Data Checksum
Data: 2 bytes device ID
Response:
0xAA
0xBB Len DeviceID 0x02 0x01 Status Checksum
Status: 0x00: Operation succeed
Remark: SL060 only response to the command that Device ID is in accord with itself,
and broadcast command that DeviceID equals to 0x0000
4-4-1-3. Get device ID
0xAA
0xBB Len DeviceID 0x03 0x01 Checksum
Response: