• When using various shop equipment, basic safety precautions should always be followed.
• Keep work area clean and free from debris.
• Keep children away from work area and shop equipment. Keep hands and feet away from
loading area.
• Study, understand, and follow all instructions before operating this device.
• Do not exceed rated capacity.
• Do not operate the pump separately without connecting with ram.
• Use only on a hard level surface.
• Use clean, moisture free, and regulated compressed air. Do not use oxygen, carbon dioxide,
combustable gases or bottled gas as a power source.
• DO NOT attempt to operate the pump by standing on the treadle. Use only light foot pressure
to operate the pump mechanism.
• Never attempt to disconnect hydraulic connections under pressure. Release all line pressure
before disconnecting hoses.
• DO NOT adjust factory set Safety Valve or Overload Valve. Valve should only be set or reset by
qualified technician.
• No alterations shall be made to this product.
• Failure to heed these warnings may result in personal injury and/or property damage.
!
WARNING!
INSPECTION
!
The use of shop equipment is subject to certain hazards that cannot be prevented by mechanical
means, but only by exercise of intelligence, care, and common sense. It is therefore essential
to have personnel involved in the use and operation of equipment who are careful, competent,
trained, and qualified in the safe operation of this equipment and its proper use. Examples of
hazards are dropping, tipping, or slipping of parts/components caused primarily by improperly
securing loads, overloading, off-centered loads, use on other than hard level surfaces, and using
equipment for a purpose for which it was not designed.
The owner and / or operator shall study and understand the product and safety instructions before
operating this equipment. Safety information shall be emphasized and understood. If the operator
is not fluent in English, the product and safety instructions shall be read to and discussed with the
operator in the operator’s native language by the purchaser / owner or his designee, making sure
that the operator comprehends their contents. A copy of these instructions / warnings shall be
retained for future reference.
Visual inspection shall be made before each use of this equipment, checking for abnormal
conditions, such as cracked welds, leaks, damaged, loose or missing parts. This equipment shall
be removed immediately from service if it is believed to have been subjected to an abnormal
or shock load, the equipment shall be inspected by a qualified repair facility. Owners and / or
operators should be aware that repair of this equipment may require specialized knowledge and
facilities. It is recommended that this equipment be inspected annually by a qualified repair facility.
Defective parts, decals, safety labels or signs should be replaced with STRONGARM specified parts.
WARNING!
!
2
