Strong VersaMount SM-VM-ART1-IW-M, Руководство по установке

Страница: 5 / 10

Pg. 5
3.2 Inserting and Securing the Enclosure into the Wall
• Insert the enclosure into the wall.
• Shim the sides as needed so the enclosure
does not deform when securing the side walls.
Insert the lag bolts (A) into the outer holes
at the sides of the enclosure to secure the
enclosure to the wood studs.
4. Installing Equipment into the Strong VersaMount
The VersaMount allows for a variety of equipment
configuration options. Experiment with the equipment
configuration to determine the best installation method.
For images of different configurations of equipment
installed in the VersaMount, see the VersaMount product
page and Support Tab at SnapAV.com.
4.1 Using Knockouts
The knockouts on the top and bottom can hold low-
voltage rings or outlet boxes. An outlet box must be an
old-work metal junction box
with integrated supports
for secure mounting; new-work plastic outlets do not fit.
4.2 Modules
The back wall of the enclosure has holes and knockouts
on 6” centers to allow for easy structured can module
installation. Use a 1/4” drill bit to open more of the
knockout stamps as needed to mount equipment.
5. Install the Display Adapter Plate
This mount is compatible with most VESA patterns
between 75×75 and 300×300. Some VESA
patterns require the use of the included display
adapter brackets. The table at right shows whether
your display requires adapter brackets: standard
VESA patterns are shown in white. Patterns with
check marks can use the base plate (proceed to
step 5.2); VESA patterns with double diamonds
require the use of adapters (proceed with step 5.1).
knockout
knockout
module
holes
75 100 200 300 400 500 600 700 800
75
P
100
P P
200
P P ³
300
³ ³
400
500
600
700
mount arm not shown for clarity