Pg. 4
www.snapav.com Support: 866.838.5052
SM-RBX-PRO-14-BLK Installation Manual
Dimensions
Warranty
Limited Lifetime Warranty
All Strong back-boxes and brackets have a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all
components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to
products that have been abused, modified, or disassembled. Products to be repaired under this warranty must be returned to
SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).
Lifetime
Contacting Technical Support
Phone:
(866) 838-5052
Email:
© 2014 Strong™
140905-1500
15.51”
14.55”
3.76”
13.29”
14.25”
Double Layer
(Factory Position)
Single Layer
1.50in.
2.00in.
2.10in.
1.40in.
Center Support Plate Position Dimensions
Insert
hooks
on one
side first
Push in on
opposite
side to
close
Installing the Optional Compact WB-200VB
Remove the bottom panel by unscrewing the 4 pre-installed screws. Insert the
compact wattbox, and re-thread the four screws to permanently secure it. For
further installation information, see the WB-200VB manual.
Attaching the Strong VersaBox™ Pro Cover
To attach the cover, knock out any additional wire pass-throughs needed, and
then slid the cover on, seating the hooks on the right side first, and pushing the
left side in until a “click” is heard.
