Strong SRT 8119, Руководство пользователя

Страница: 22 / 29

The LED/standby indicator
and LED display (if
available on your receiver)
are not switching on.
The power cable or power
adapter is unplugged.
Check that the power cable or
power adapter is plugged to the
wall outlet.
If your receiver has a main
power switch: The main
power switch on the rear
panel is set to [OFF] .
Switch the main power on.
The electrical outlet may be
damaged.
Check with another device if the
electrical outlet is supplied.
No signal.
The receiver is not connected
to the signal source (DVB-C)
or to the antenna (terrestrial
or satellite antenna).
Check the lead of the antenna
or cable.
Check that the coaxial cable is
correctly fitted to the antenna input
on the receiver.
Damaged or defective
connectors (IEC-connectors
(DVB-T2).
Check connectors for visible
damage.
The antenna (terrestrial or
satellite) is damaged.
Check the antenna for visible
damage.
Out of digital signal area.
Check with your dealer or contact
your local Service.
An active antenna requires
that the antenna power/
external power is switched
ON.
Switch the antenna power of the
receiver ON/connect an external
power source.
Wrong direction of the
antenna.
Check the signal strength and
quality and adjust your antenna
correctly or contact your local
Service.
Multiswitch is defective or
power cable or power adapter
of Multiswitch is unplugged.
Check that the power cable or
power adapter of Multiswitch is
plugged to the wall outlet. Contact
your local Service.
18