17
PART 1 • English
En
gl
is
h
1 = Set marker point in playback, press again to delete marker point.
2 = Jump to next marker point.
3 = Jump forwards in time. (See details in 7.6.5
DVR Configuration
under
Step to
.)
noTE:
You can also access the Record Manager from viewing mode with the REd
button on the remote control. The help banner at the bottom of the screen
explains all buttons in the Record Manager. Press EXIT to save the settings
and quit the menu.
7.6.3 dvR hdd Information
This option shows relevant information about the connected USB device.
Select
DVR HDD Information
from the
Media
+ menu and press ok to enter.
Press EXIT to leave.
7.6.4 hdd format
The
HDD format
menu allows you to format the connected USB device.
WARnIng!
Formatting will permanently delete ALL data stored on the connected device.
Please make a backup copy of all data you wish to keep before entering the
HDD Format menu. STRONG cannot be held responsible for loss of data
from USB devices used with this receiver.
Select
HDD Format
from the
Media
+ menu and press ok to enter. Use
tu
to select the partition you
wish to format (Partition 1 is set per default) and press
q
to highlight
Format
. Press ok to proceed,
select
FAT
or
Cancel
, or press EXIT to leave without formatting.
noTE:
It is possible to use already NTFS formatted USB disks.
7.6.5 dvR Configuration
This menu allows you to make settings for Time Shift, recording and playback.
Select
DVR Configuration
from the
Media
+ menu and press ok to enter.
Use
pq
to move the highlight and
tu
to change settings.
Press EXIT to quit.
Time Shift
:
On
or
Off
. When
Time Shift
is set to
Off
, Time Shift becomes inactive.
Time Shift to Record
:
On
or
Off
. When set to
On
, Time Shift is also possible during recording.
Record Type
:
TS
or
PS
. When
TS
is selected, recordings will also include subtitles and
teletext (when available).
PS
makes recordings without these extras.
Record Selection
Select the partition whereto the receiver should record.
Standby after record
:
On
or
Off
. Select if receiver must go to standby mode after Timer record.
Step to
:
30 sec
to
10 min
. Set the time step you like to jump forward with the button 3
during playback of recorded files.
