13
PART 1 • English
En
gl
is
h
Connection
:
Use this option to select the connection to your TV set. Select
HDMI
or
TV
SCART
. If connection type HDMI is selected, then only the CVBS signal is
available on the TV SCART.
Digital Audio Output
: Toggles between
PCM
and
Bitstream
output. When
PCM
is selected, all
all digital audio will be converted to stereo audio.
Bitstream
enables multi-
channel audio on HDMI for use with a Home Cinema Set.
7.3.3 local Time setting
Here you can set up your region and time zone.
Region
:
Use
tu
to select the region you live in.
GMT Usage
:
Set to
On
for broadcaster defined time or to
Off
to input time and
date manually.
GMT Offset
:
Allows you to adjust the time zone you live in. This option is only available
when
GMT Usage
is set to
On
.
The
GMT Offset
range is "-11:30 ~ +12:00", increasing by half hours
progressively. The cities matching the set
GMT Offset
are displayed at the
bottom of the screen.
Summer Time
:
Select
Off
or
On
to add one hour extra for summer time during the summer.
Date
:
Date
and
Time
settings are available only when
GMT Usage
is set to
Off
. Use
the 0~9 buttons to enter the date. Press EXIT to proceed.
Time
:
Date
and
Time
settings are available only when
GMT Usage
is set to
Off
. Use
the 0~9 buttons to enter the time. Press EXIT to proceed.
Time Display:
Select
On
to display time on screen,
Off
to remove.
7.3.4 Timer setting
This menu allows you to set up to 8 timed events for recording or waking up the receiver.
Use
pq
to select
Timer Setting
from the
System Setup
menu and press ok to enter.
The receiver will display a list with 8 timers, followed by their respective status. Select the timer you
wish to set or change with
pq
and press ok to proceed.
The timer setup menu will now be displayed.
The following settings are available:
Timer Mode
:
Choose between
Off
(Timer inactive),
Once or Daily
(Timer will be executed
every day, same time) or
Weekly
(timer will be executed every week, same day,
same time)
Timer Service
:
Choose between
Channel
(Timer will wake up the receiver) or
Record
(Timer
will start to record the scheduled event).
Wakeup Channel
:
Use
tu
to select the channel the timer will wake up with.
Wakeup Date
:
Use the 0~9 buttons to input the date for the timed event.
Wakeup Time
:
Use the 0~9 buttons to input the start time.
Duration
:
Use the 0~9 buttons to input the timer duration.
When all settings are according to your wishes, use
pq
to move the highlight to
Save
and press ok
to confirm. To quit the timer without saving your settings, move the highlight to
Cancel
.
