background image

22

NEVER open or disassemble your receiver. This may cause a dangerous situation and will void the 

warranty.

Symptom

Cause

Remedy

The standby indicator 

does not light up

The mains lead is unplugged/the 

multipoint connector is switched off.

Check the mains lead/switch the 

multipoint connector on.

There is no image, no 

sound, no display

There is no power supply

Check the connection cables

There is a short circuit in coaxial 

cable

Disconnect device from mains power 

supply, eliminate the short circuit 

in the coaxial cable or connections, 

reconnect, and activate device

Cables are missing or defective.

Check your connecting cables

A wrong video format was selected 

in the OSD settings

Check the settings to make sure your 

TV supports the selected format

There are small blocks in 

the video, occasionally 

no sound, occasionally 

no signal

The signal is too weak

Check for defective cables or 

connectors. Alternatively, reduce the 

coaxial cable length

Scrambled channel 

message

The channel is scrambled.

Select an alternative channel.

No response to remote 

control

The receiver is off.

Plug in and turn on the plug.

The handset is not aimed correctly.

Aim the handset at the IR sensor.

The IR sensor is obstructed.

Check for obstructions.

The handset batteries are 

exhausted.

Replace the handset batteries.

Password forgotten

The default password is 

0000

Contact the local Service Hotline 

or send an email to our support via 

www.strong.tv

The external USB HDD 

does not start.

The power consumption is too 

high.

Connect an extra power supply 

adapter to your USB HDD device.

The receiver switches to 

standby automatically.

The 

Auto Standby

 function is 

activated and has reached the set 

time (default 3 hours).

Set the power down time or disable 
it in the 

SettingsTime Setting

 menu, 

parameter 

Auto Standby After

.

9.0 SPECIFICATIONS

Demodulator

Demodulation: 

QPSK, 8PSK

Input symbol rate: 

DVB-S QPSK: 1 ~ 45 Ms/s

 

DVB-S2 8PSK/QPSK: 1 ~ 45 Ms/s

FEC decoder: 

Auto, 1/2, 2/3, 3/4, 5/6, 7/8 in DVB-S mode

 

 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 in DVB-S2 QPSK mode

 

3/5, 2/3, 3/4, 5/6, 8/9, 9/10 in DVB-S2 8PSK mode

video

Profile level: 

 MPEG-2 MP@ML, MPEG-4 AVC high profile H.264 [email protected]/[email protected]

Max. video resolution: 

1920x1080p

Aspect ratio: 

 4:3 and 16:9, Pan & Scan Automatic adjustment for 16:9 TV sets, 
Letterbox supported

Содержание SRT 7806

































Отзывы: