Strong SRT 7500, Руководство пользователя, Страница: 7 / 20

4
PART 2 • English
Accessories:
1 x Remote control
2 x AAA Batteries
1 x HDMI cable
2.0 YoUR RECEIVER
2.1 front Panel
Fig. 1
1. STAnDbY/on: Set receiver to Standby or ON mode.
2. MEnU: Access to the Main menu
3. bACK: Viewing mode: remove appearing messages.
In Menu mode: go to previous screen or menu.
4. oK: Viewing mode: enter the channel list; another pressing on selected channel will
switch back to viewing mode.
In Menu mode: enter selected submenus and confirm settings.
5. Info: Shows current channel information
6.
tupq
: Viewing mode: used to switch channel up/down or de-/increase the volume.
In Menu mode: buttons are used for navigation
2.2 Rear Panel
Fig. 1
1. SAT In: To connect satellite antenna cable.
2. HDMI: To connect to HDMI connector of your TV set.
3. ETHERnET: For service use only.
4. TV SCART: For connection of Scart cable to your TV set.
5. AUDIo oUT l/R: Audio output.
6. oPTICAl AUDIo oUT: Digital optical audio output to connect to your amplifier or sound system.
7. RS-232: For service use only.
8. PoWER CAblE: To connect to power source in range of 220 - 240 V AC, 50 Hz.
2.3 Remote Control Unit
Fig. 3
1. MUTE: To mute the Audio output
2. STAnDbY/on: Switch to Standby or ON
3. DIGIAKTIf:
Used to show technical channel info (in viewing mode)
4. MoDE: Direct access to games menu (in viewing mode)
5. MEDIA: Direct access to the media browser (in viewing mode)
6. TV/RADIo: Switch between TV, Radio and All channel list mode (in viewing mode)
7. fAV: Access the FAV list (preconditioned FAV list is defined)
8. lAnG: Select available audio languages (in viewing mode)
9. SUbT: Select available subtitle languages (in viewing mode)
10. oPTS: Access to the Main menu
11. GUIDE: Access the Electronic Program Guide
12. Info: Shows current channel information
13.
pqtu
: Viewing mode: used to switch channel up/down or de- /increase the volume.
In Menu mode: buttons are used for navigation
14. oK: Viewing mode: enter the channel list; another pressing on selected channel will switch to
viewing mode again.
In Menu mode: enter selected submenus and confirm settings.
15. P<P: To switch between 2 previously watched channels
16. bACK: Viewing mode: Remove appearing messages.
In Menu mode: to go to previous screen or menu.
17. PR -/+: Used to switch through the channels (in viewing mode)
18. Vol -/+: Used to decrease or increase the volume
19. ColoRED bUTTonS: Used for teletext functions.
In Menu mode: RED/GREEn used to scroll lists and YElloW/blUE for special described functions.
20. nUMERIC bUTTonS: used to insert numbers.
In Menu mode: used to insert numbers or letters
21. AV: No function
22. TXT: To show the teletext