Strong SRT 7500 Скачать руководство пользователя страница 13

Страница: 13 / 20

PART 2 • English

5.4 Configuration

In this menu you can set up your personal preferences for below adjustments. Use the

for navigation and

buttons to change settings. For entering values use the nUMERIC buttons. With bACK you can always cancel actions
and exit the actual menu or submenu.

Menu Language:

Use the

buttons to select your language (English, German, Turkish, Czech, Slovak)

TV Settings:

Press oK to enter submenu for adjusting the TV Type (4:3 or 16:9) and Screen Format
(4:3 = LetterBox / Pan&Scan, 16:9 = PillarBox / Full)

HDMI Output:

Use the

buttons to select a setting according your desired settings/TV setup.

Date Time Settings:

Press oK to enter submenu to adjust the Time Update (Automatic or Manual), Offset
(manual mode: +12h to -12h), Time (automatic: actual time will be shown; manual mode:
enter your time) and the Date (in manual mode: enter your actual date).

If you have chosen the automatic time update, receiver will collect time from your preset installed satellite (Austria and
Germany from Astra 19.2, Czech and Slovakian Republic from Astra 23.5).

Parental Settings:

For accessing the parental setting submenu you will have to enter your PIN. Press oK
to enter submenu to adjust the Lock Mode (Disabled, Main Menu or Installation), Front
Panel Lock (Disabled or Enabled), Change Password (by pressing oK a screen will be
displayed asking you to enter new PIN and to confirm it. The default PIn code is 0000. )

Software Upgrade:

Select this option in order to update your receiver with the latest software version. Software
update services are available from Astra at 19.2E. Press oK to enter submenu to Start Upgrade.
By pressing oK again receiver will search for correct update parameters belonging to its
specific update process. Follow further instructions displayed on screen. During the software
upgrade procedure, you can cancel it any time by pressing the bACK button.

WARnInG

Do not switch power off and do not disconnect the receiver from the dish during update process.

Front Panel:

Press oK to enter submenu for adjusting the Scroll Status (Disabled or Enabled). In
Enabled mode you can adjust the Scroll Speed between Slow, Medium and Fast.

note

Below the TV picture you can see information regarding website, SW built date, serial number, loader
and software version, which might be asked from customer helpline or service support in case you
need any help or support.

5.5 Timers

You can set the timer to make the receiver perform designated actions including timer based wake-up or sleep
instructions to the receiver. Use

for navigation and press oK to enter desired timer setup. Afterwards use the

buttons to change settings and nUMERIC buttons to enter the desired values. With bACK you can always cancel actions
and exit the actual menu or submenu.

Name:

Here you can select the desired channel from your channel list.

Time:

Enter desired start time.

Date:

Enter desired start date.

Duration:

Enter the desired duration in minutes.

After all fields contain your desired entries, go to Mode for setting this timer to Active mode. Then press oK to save all
settings. When the timer has reached its start time, the receiver will switch to the desired program. When the end time
is reached, the receiver goes to stand-by mode.
Mode: Use this option to activate or deactivate the timer settings.

note

To avoid any problem in Timers menu, please check your date and time settings in Configuration
menu. Recommended option is to set Time Update to Automatic to ensure that your date and time
settings are correct.

5.6 Games

This menu contains following games: Bomb, Worm III, Tetris, Connect4 and Sokoban. Use the

buttons to select

the desired game and press oK to enter. Then choose the level of difficulty and press oK to enter the game. To exit from
a game, press bACK.

BOMB:

Use

and

to move the square. Try to find all mines in the field.

WORM:

Use

and

to move.