Strong SRT 7335 CI, Руководство пользователя

Страница: 21 / 31

PART 1 • English
20
WARNING: If you have selected RGB mode then HDMI (digital) and Y, Pb, Pr (component) outputs
on the receiver would be disabled!
Brightness / Contrast / Saturation
Use
tu
buttons to select an item. Or press OK button to display a list of options, use
pq
buttons to
select level of Brightness / Contrast / Saturation and press OK button to confirm selection.
5.3.3 Time Setting
To synchronise time in your receiver with broadcaster: set GMT usage to ON, select your time zone and
set Summer time accordingly to season.
In some cases (especially multi satellite installation) it is recommended to set GMT usage to
OFF and
setup date/time manually.
5.3.4 Parental Control
In this menu, you can set menu lock status ( Disabled or Enabled ) and change the PIN code. Parental
rate menu allows you to block watching content which is rated for age equal or higher then you have
set in this menu. Function of this feature depends from broadcast and STRONG would not take any
responsibility if it doesn’t work.
The default PIN code is 0000
.
5.3.5 Software update
Select this option in order to update your receiver with the latest software version.
Software update services are available from ASTRA at 19.2E and HOT BIRD at 13E satellites.
If your antenna is primed to ASTRA 19.2 E then enter following parameters:
Frequency: 12604; Polarity: H (Horizontal); Symbol rate: 22000
If your antenna is primed to HOT BIRD 13E then enter following parameters:
Frequency: 12476; Polarity: H (Horizontal); Symbol rate: 27500
Press RED (Search). The receiver will check availability of software update and propose to update
software if new version is available. Follow future instructions displayed on screen. After software update
process receiver will switch on a last watched channel automatically.
NOTE: during software download process Progress of software download will be displayed on screen.
NOTE: Availability of the software update is subject of local broadcast condition and may not
work in all countries. Contact your vendor to find out more about this function.
WARNING: Do not switch power off and do not disconnect the receiver from the dish during
update process
5.3.6 System Information
Displays the information about software version installed in the receiver.