Strong SRT 7335 CI, Руководство пользователя

Страница: 14 / 31

PART 1 • English
13
English
4.3 Dish adjustment
After selection of ASTRA1C,1E(19E) or HOT BIRD(13E) menu WIZARD-DISH ADJUSTMENT will appear.
Adjust your dish position in small steps until the signal strength and quality bars turn green or yellow.
Try to reach the maximum possible strength and quality level. Once you are sure the signal cannot be
improved, fix the dish on this position and press
OK on your remote control to start the channel search.
After finished search, the first programmed channel will be displayed on screen.
TIP: Depending from OSD language and satellite selected you may be prompted to select
preinstalled channel list. These channel lists include most popular channels ordered
according to the preference of most of the customers.
4.4 Channel set-up
If you select Other satellite then menu Channel set-up will be displayed on screen. Using
pq
buttons
select the Satellite item and press OK to display list of satellites. Use
pq
buttons to select satellite of
your choice and press OK . Using
pq
buttons select Dish number item and using
tu
buttons select
dish number and transponder , network search and channels which you want among All channels , FTA and
Scrambled in search for menu. Press OK in Dish number mode to set up Dish menu .
In Dish setup menu configure settings of the LNB, DiSEqC switch and Antenna mode. Please refer to
chapter 5.2.2 Dish set-up for detailed information. If you use fixed dish, then press RED (Auto scan)
button on remote control to start channel search. If you use dish mounted on DiSEqC 1.2 or GOTO X
positioner then select
Dish position item and press OK . If you use GOTO X positioner then GOTO X setup
menu will be displayed. Please refer to GOTO X setup description in chapter 5.2.4. After setting up dish
position, press RED (Auto scan) button on remote control to start channel search.
5.0 MAIN MENU
All the important settings and features of your receiver can be operated in Main Menu . The Main Menu
consists of six sub-menus: “Channel Organiser”, “Satellite Search”, “Installation”, “Timer”, “Application” and
“Common Interface” Press the MENU button when the menu is off, the MAIN MENU screen will appear.
5.1 Channel Organiser
In MAIN MENU screen, use
pq
buttons to select Channel Organiser , then press OK or
u
to enter the
Channel Organiser menu , which consists of the sub-menus Sort Channels, Add to Favourites and Edit Channels.
5.1.1 Sort Channels
In this menu, you can sort channels by order or move channels to specified position.
NOTE:
Channels are sorted in the selected channel list only. Sorting of the channels in one list
do not change order of the channels in another list. I.e. sorting of the channels in list. “All
channels” do not change order of the channels in list of particular satellite and vice versa.