Scan Channel:
Press
t
u
to select
TV+Radio
,
TV Channel
or
Radio
Scan Mode:
Use
t
u
to select mode
auto scan
,
pre-set scan
or accurate Scan}.
This the default mode and should be used first.
Auto Scan
All stored transponders in the memory will be scanned.
Pre-set Scan
A few satellites carry a list with transponder parameters of all transponders
on that satellite. It can be useful if the
auto scan
does not find an expected
channel.
Accurate scan
This is a blind scan mode, in which the scan process probes certain
frequencies to find unknow parameters of a Satellite.
Network Search
Use
t
u
to select
Yes
or
No
. Some providers use more than one transponder
to transmit their Pay-TV programmes. Select
Yes
and one of those
transponders and it will find the corresponding transponders as well. Note:
This is only applicable for scrambled channels, which can not be seen with
this receiver.
Tuner
Not applicable for this receiver.
After configuring, select
Search
and press
OK
to start scanning with the selected settings.
Your receiver will now perform an (automatic) channel search with the scanning progress shown on
screen. During the channel search you can quit the scan process with
. When the process has been
completed, all found channels will be stored. Press
OK
to confirm and leave the menu by pressing with
several times, or proceed to editing parameters by pressing
only once.
Multi-Satellites Search:
To scan more than one satellite in one go.
These must have selected before in the
Satellite List
.
The procedure is the same as for
Single Satellite Search
, except for the
Satellites
mentioned in the top line.
All those will be scanned one after the other.
7.1.5 Transponder Edit Options
Scanning by transponder (Manual Scan)
Select
TP List
in the Installation menu.
The transponder list is shown for the in the top line selected satellite.
Search
Use the
pq
buttons to highlight the transponder you want to scan and
press
OK
or
BLUE
for
Search
. A window with scanning settings will be
displayed. After configuring the settings press
OK
to start the scanning of the
highlighted transponder. When the scan process has been completed, all new
found channels will be added to the end of the channel list.
Options are:
FTA Only
:
Press
t
u
to select
No
to search for (scrambled and free) channels or {Yes to
search for Free to Air channels only.
NOTE:
Scrambled channels can not be watched with this receiver.
Scan Channel:
Press
t
u
to select
TV+Radio
,
TV Channel
or
Radio
Network Search
Use
t
u
to select
Yes
or
No
. Some providers use more than one transponder
to transmit their Pay-TV programmes. Select
Yes
and one of those
transponders and it will find the corresponding transponders as well. Note:
This is only applicable for scrambled channels, which can not be seen with
this receiver.
17
English
