4.1.3 Satellite List
Press
p
or
q
button to highlight satellite, press
OK
button select a satellite. A heart symbol will mark the
selected satellite(s).
RED
button: Edit satellite
GREEN
button: Add satellite
BLUE
button: Delete satellite
4.1.4 Antenna Setup
Motor Antenna:
If you selected
Motor Antenna
in Antenna Connection menu, this menu allows you to change
settings like LNB frequency, motor type, local longitude/local latitude, delete all,
motor setting and limit setup.
Fixed Antenna:
If you selected
Fixed Antenna
in
antenna connection
menu, this menu allows you to change settings like
satellite, LNB frequency, transponder, DiSEqC 1.0, DiSEqC 1.1, 22kHz, and polarity.
When settings are correct, press
to return to DVBS installation menu.
4.1.5 Single Satellite Search
To scan 1 satellite:
Select
Satellite
,
FTA only
,
Scan Channel
,
Network Search
,
Scan Mode
and
Tuner
to your requirements.
Highlight
Search
and press
OK
button to start search on the selected satellite.
4.1.6 Multi Satellite Search
To scan more than 1 satellite:
Adjust
FTA Only
,
Scan Channel
,
Network Search
,
Scan mode
and
Tuner
to your requirements.
All satellites selected in the satellite list are shown in the top line.
Highlight
Search
and press
OK
button to start searching on all satellites selected in the satellite list.
4.1.7 Transponder List
If needed, transponders can be edited, added, deleted, or individually searched. Parameter of satellite
transponders can be changed by broadcasters over time.
RED
button:
Edit
TP
GREEN
button:
Add
TP
YELLOW
button:
Delete
TP
BLUE
button:
Search
Channels
Press
t
u
button to change satellite.
Press
p
or
q
button to select Transponder.
Select the
Search
option, press
OK
button to enter the auto scan menu.
Press the cursor button to set FTA only
Yes
or
No
. (FTA = Free to Air, Free to watch.)
9
English
