Strong SRT 6350 CI, Руководство пользователя

Страница: 9 / 26

PART 1 • English
5
English
2.0 YOUR RECEIVER
2.1 Front Panel
Figure 1
1. Power On/Off button
2. Channel Up/Down buttons
3. MODE INDICATOR RED light indicates that the receiver is in STAND-BY mode.
GREEN light indicates that the receiver is in AWAKE mode.
4. 4 digits display In STAND-BY mode this indicates current time
In AWAKE mode this indicates current channel number
5. Common interface slot Insert your common interface module to this slot in order to have
access to appropriated encrypted channels.
2.2 Rear Panel
Figure 2
1. SAT OUT
Gives you the possibility to connect an extra receiver (analogue or digital).
2. SAT IN
To connect the coaxial cable from your LNB on the satellite dish to this connector.
3. TV SCART Connector
Use this connector to connect your receiver with your TV set using a SCART cable.
4. VCR SCART Connector
Use this connector to connect your receiver to your video recorder using a SCART cable.
Your video signal will now be looped through your receiver to your TV set.
5. S/PDIF Digital audio output
Use this coaxial output to connect your receiver to the input of your digital audio amplifier.
6. RS-232 Serial Port
This serial port can be used to connect your PC to your receiver to download new software
versions to your receiver.
7. Power ON/OFF Switch
8. Power Cord
Your receiver requires a current of 90 ~ 240 V AC (Auto-selectable), 50 ~ 60Hz ±-5%. Make
sure to check the power specification before connecting your receiver to the wall outlet.