Strong SRT 6350 CI, Руководство пользователя

Страница: 11 / 26

PART 1 • English
7
English
3.0 CONNECTIONS
3.1 Connecting to TV & VCR
Basic connection with a SCART cable (Fig. 3)
1. Connect the satellite signal from the LNB to the SAT IN connector.
2. Connect the TV SCART connector at the back of the receiver to the SCART IN connector
on your TV set
Advanced connection of the receiver to the TV set and VCR (Fig. 4)
1. Connect the satellite signal from the LNB to the SAT IN connector.
2. Connect the TV SCART connector at the back of the receiver to the SCART-IN connector
on your TV set.
3. Connect the VCR scart connector of the receiver to the SCART-IN connect on your VCR set.
3.2 Connecting to Digital Audio Amplifier
Connect S/PDIF connector at the back of your receiver to appropriated input of your Digital Audio (Fig. 5)
3.3 Connecting to Satellite Dish
Connecting a fixed satellite dish to your receiver (Fig. 6)
Make your choice of which satellite you want to receive your signals from, and have your dealer aim
your dish at the requested satellite. Connect a coax cable to your LNB and the other end directly to
the SAT IN connector of your receiver.
Connecting multiple fixed dishes to your receiver using a DiSEqC 1.0 switch (Fig. 7)
If you want to watch programs from more than one satellite (For example from Astra and from
HotBird) it is advisable to use fixed dishes and a DiSEqC 1.0 switch. Have your Dealer aim the
dishes at the requested satellites and connect the LNB’s with coax cables to the IN connectors
of the DiSEqC 1.0 switch. Connect the OUT connector of the DiSEqC 1.0 switch to the SAT IN
connector at the back of your receiver.
Connecting a dish on a motorized positioner to your receiver (Fig. 8)
Another possibility for watching programs from multiple satellites is by mounting a dish to a
motorized DiSEqC 1.2 positioner. Have your dealer mount the dish to the positioner, set the correct
angle of the elevation and let him set the center point for your positioner. Connect the LNB with
a coax cable to the LNB IN connector of the positioner, and connect the OUT connector of the
positioner to the SAT IN connector at the back of your receiver.
3.4 Connecting to computer by serial cable for downloading software
Connect the RS-232 connector on the back of your receiver to the Serial port of your computer using
a serial cable (Fig. 9). Instructions how to download software can be found on our website www.
strongsat.com (support > download). However, this receiver can download new system software
automatically by satellite.