PART 1
z
English
24
4. Use the
UP/DOWN
keys on your remote to select an item and use the
LEFT/RIGHT
button
to set up any values.
Satellite:
Select “
Satellite
” and press
OK
. The satellite list is displayed and then you can
choose a satellite from which you want to download your channels from by pressing
OK
.
(Please see inside cover Screen 20)
Tip:
If you want to rename the satellite, press the button on the remote control when you are in the
list of satellites.
LNB:
Select “
LNB
” and press
OK
or the Right button. In the “
LNB field
”, select one of
the available LNB's. If you want to set LNB related values, press
OK
and the LNB Set-up
menu (Described in section 5.1.4.3) will be displayed.
Dish Position:
Select “
Dish position
” and press
OK
or the Right button. It displays the
dish position of the current satellite. When you use a DiSEqC 1.2 positioner, you can
select dish position in this field. To set a dish position we refer to chapter 5.4.4.1.
“
Positioner Set-Up
”
Frequency:
Select ”
Frequency
” and press
OK
.
1. The list of TP values of the current satellite is displayed. You can select any of the standard
available Frequencies.
2. The functions of the colored buttons are switched to represent other functions. (Please see
inside cover Screen 21).
3. To edit a TP value, press the
RED
(Edit) button.
4. To change the current TP value, press the
BLUE
(Add) button.
5. Press the
YELLOW
(
Save
) button to save the settings.
6. Press the
BLUE
(
Delete
) button to delete the current TP value. (Save is only available in the
Edit mode or the Add mode.)
7. Press the
BACK
button to return back to the “
Channel Set-up
” menu.
Scan Mode:
Designate channels scanning whether “
FTA
” (Free to Air) only or “
All
”
channels (including scrambled channels)
Network Search:
Set this field to “
On
” to perform Network TP Search.
