PART 1
z
English
10
3.1.2 Basic connection with a Scart cable
(Please see inside cover Figure 5)
Connect the satellite signal from the LNB to the SAT IN connector.
Connect the TV scart connector at the back of the receiver to the scart-in connector on your
TV set.
Optional: connect a UHF coaxial or cable coming from your antenna or cable TV to the
ANT IN input connector at the back of the receiver.
3.1.3 Advanced connection
(Please see inside cover Figure 6)
Connect the satellite signal from the LNB to the SAT IN connector.
Connect the TV scart connector at the back of the receiver to the scart-in connector on your
TV set.
Connect the VCR scart connector at the back of the receiver to the scart-in connector on your
VCR set.
Connect a UHF coaxial or cable coming from your antenna or cable TV to the ANT IN input
connector at the back of the receiver.
Connect a coaxial cable to the TV OUT connector at the back of the receiver. Connect the
other end of this coaxial cable to the ANT IN connector of your VCR.
Connect the TV OUT connector of your VCR to the ANT IN connector of your TV set with a
coaxial cable.
Note:
If you have a digital audio amplifier with a digital audio input, use the S/PDIF output.
3.1.4 Connection with Audio Cable RCA Connectors
(Please see inside cover Figure 7)
Connect the satellite signal from the LNB to the SAT IN connector.
On the back of your receiver you will find the RCA connectors (Audio Left & Right - Red&
white, Video - Yellow).
Install an audio/video cable between the corresponding RCA connectors of the receiver and
those of your TV set or amplifier.
3.1.5 Connection to a digital audio amplifier using the S/PDIF output
(Please see inside cover Figure 8
)
Connect the S/PDIF out connector on the back of your receiver to the S/PDIF input connec-
tor of your digital amplifier, using a coaxial cable.
Do not forget to turn the S/PDIF function on (Main menu > Installation > System Set-Up >
TV/VCR Settings > SPDIF Output > On).
