6
Connectors
Connector 12 RF Loop Out
For Aerial Signal Pass through to your TV and/or VCR
Channels 21 to 69
This is the
signal coming from your antenna
and
passing through the SRT 5390
This can be used for a variety of purposes as per
items
A
and
B
as follows.
A.
With a separately purchased RF Lead, you can
connect from this connector to your TV antenna IN.
This enables you to switch back to normal
analogue
viewing. I.e. you would switch back to normal TV
analogue mode by pressing the
TV Mode button
on
your TV Remote Control.
B.
You can choose to connect RF from this connector
to your VCR (separately purchased Lead) which will
enable you to watch a normal Digital Broadcast
Channel through the SRT 5300 / SRT 5390 and at the
same time you can record a different broadcast
channel into the VCR.
Therefore, as you are watching your digital channel
through the SRT 5300 / SRT 5390, you would select a
channel via
your VCR Remote Control
and press
Record Button on your VCR.
E.g. you may be watching the Digital transmission of
CH7 through the SRT 5300 / SRT 5390 as normal
and recording CH9 RF analogue through your
attached VCR.
Connector 7 RF Out to enable
tuning of the UHF Signal
(Normally used when no Audio Video connections are
available on your TV)
With a separately purchased RF Lead, you can
connect from this connector to your VCR or TV.
When connecting to a VCR, you then Tune the VCR
to Default Channel 38.
This means that you are able to record into the VCR;
the same channel you are viewing through the SRT
5390. This would be RF analogue.
Содержание SRT 5390
Страница 91: ...SRT 5390 Connection Recording Supplement...
