14
PART 1 • English
No response to remote
control
Receiver off
Remote not aimed correctly
Front panel obstructed
Remote batteries exhausted
Plug in and turn on plug
Aim remote at front panel
Check for obstructions
Replace remote batteries
Forgotten PIN code
Contact local Service Hotline or
send email to our Support via www.
strong.tv
After moving the receiver
to another room / area
you are no longer able to
receive digital reception
Antenna signals are too weak
Press the Info button on remote
3x to call up signal bars and adjust
antenna for (maximum) reception
or rescan channels
The receiver switches off
automatically.
Auto Standby function
enabled.
Disable auto standby. See section
5.3.8 for details.
8.0 SPECIfICATIonS
Demodulator:
Demodulator:
COFDM; 16 QAM/64 QAM
Transmission mode:
2 K - 8 K
video Decoder:
Profile level:
MPEG2 MP@ML
Video resolution:
720 x 576 pixels (PAL), 720 x 480 (NTSC)
Decoding & Video Out:
PAL & NTSC
Aspect ratio:
4:3, 16:9
Audio Decoder:
MPEG MusiCam Layer 2
Sampling rate:
32, 44.1, 48 kHz
Audio mode:
Stereo, Joint Stereo, Dual Mono, Mono
Tuner:
Front End:
DVB-T, UHF & VHF Tuner
Input frequency range:
174 ~ 230 MHz (VHF) and 470 ~ 862 MHz (UHF)
Loop through frequency range:
47 ~ 862 MHz
Input signal level:
-82 ~ -20 dBm
multimedia:
Video playback:
MPEG-1 and MPEG-2 encoded (mpg)
Audio playback:
MP3 and WMA formats
Picture view:
JPEG format
