Problem
Possible cause and solution
No signal or weak signal,
intermittent reception
a)
Cables might have loosened; moisture might have entered
into cables or connectors, heavy rain at present or heavy
storm at present.
Check the cable connections, LNB and other equipment
connected between the LNB and the receiver, or peak the
dish.
Wait for rain/storm to subside. Ask a local satellite specialist
for advice.
b)
The satellite dish is not pointing at the (correct) satellite(s).
Adjust the dish. Ask a local satellite specialist for advice.
c)
Satellite dish is too small, trees or buildings in path.
Change to a larger dish or change position of dish.
d)
Signal is too strong, dish is oversized.
Connect a signal attenuator to the LNB input. Ask a local
satellite specialist for advice.
Bad picture/blocking error
during heavy rain
Heavy rain will attenuate satellite signals, below a certain level
blocking will occur.
Make sure your dish installation is up to standards to minimize rain
eff ects. When in doubt, ask a local satellite specialist for advice.
If the TV turns off after
plugging a cable into any
connector
Again, turn on the TV.
NOTE:
If the problem persists after these solutions, please contact your local
support centre or send a support mail via our website www.strong.tv.
10.0 SPECIFICATIONS
Audio
Audio Output:
2 x 10 W
Video
Channel coverage:
DVB-T2: 174 MHz-230 MHz; 470 MHz-860 MHz
DVB-C: 113-858 MHz
DVB-S2: 950 MHz-2150 MHz
System:
DTV: DVB-T2, DVB-S2, DVB-C
ATV: PAL/SECAM (BG/DK/1)
AV: PAL, NTSC, SECAM
Connectors 50” 55”
1x ANT IN
1x SAT IN
1x CI
3x HDMI
2x USB 2.0
1x LAN (RJ-45)
17
English
