Strong 41000, Инструкция по эксплуатации

Страница: 13 / 34

MAINTENANCE
TO CLEAN THE SMALL LENS, remove the color boomerang assembly and using a
good grade of alcohol and piece of lens tissue (facial tissue can be used as a substitute), gently wipe both
sides of the lens until the surface is clean.
THE BACK SURFACE OF THE LARGE LENS can readily be cleaned by using the
same access hole as above with the large lens carriage in the rear position.
TO CLEAN THE FRONT SURFACE of the large lens, slide the lens carriage to the full
forward position. The front surface is now readily accessible through the front of the housing.
THE REFLECTOR should be cleaned periodically with a clean, soft lint-free cloth to
remove any dust from the reflecting surface.
THE NEGATIVE LENS, mounted on the support for the fade-out mechanism, must be
removed for cleaning. Use the same materials for cleaning this lens as recommended for both the small
and large lens. The negative lens must be replaced with the curved surface facing towards the reflector
and metal halide bulb.
THE INSIDE of the lamphouse and lens mechanism and the blowers should be cleaned
periodically, depending on the dust conditions at each installation. The blower blades need cleaning to
remove the dust build-up that accumulates over a period of time.
THE FOLLOW SPOT does not require any lubrication.
575/011