American DJ
®
Kerkrade, The Netherlands
Model:
FS-2500 DMX
SPECIFICATIONS:
Lamp: ELC 24V 250W
POWER: 230V/50Hz
Fuse : 5A GMA
Ventilation: Fan Cooling
Working Position: Any
DMX Channels: 2
WEIGHT: 18 LbS. /10 kG
Size: 22.5” x 12.5” x 9.5”
Beam Spread:
DIST. 30 ft/ 9,2m. : 5 1/2 ft./ 1,7m
DIST. 60 ft./18,4m : 10 3/4 ft/ 3,3m
HALOGEN LAMP WARNING!
This fixture is fitted with a halogen lamp
which are highly susceptible to damage if
improperly handled. Never touch lamp with
bare fingers as the oil from your hands will
shorten lamp life. Also, never move fixture
until lamp has had ample time to cool.
Thank you for purchasing this
American DJ®
product. For your convenience this lighting
effect has been lamped and is ready to be used,
there is no assembly required. Please read the
following instructions before installing or using
your new unit.
Operating Instructions:
Unit is ready to be hung or set on a Tripod. The
FS-2500 DMX features 2 DMX channels, a bright
ELC 250 watt lamp, dual focusing knobs for pre-
cise, full focusing, iris control knob at top of unit
can also blackout, color wheel with 7 colors plus
white, and a hanging bracket. Optional LTS-5 tri-
pod stand sold seperately.
Notice: When unit is brand new smoke will
emit from the inside of unit. This is the paint
on the inside burning off. There is no prob-
lem with the unit, this is normal.
To replace the lamp; locate and
unscrew the
two thumb screws on the top of the unit, remove
the lamp access panel, replace the bulb and
reassemble. Do not forget to unplug unit before
replacing bulb!
The fuse is located underneath the power switch
Caution!
Always disconnect from main
power before replacing lamps or servicing unit.
Remember to always replace with same lamp
and fuse.
American DJ
®
User Instructions
P
R O D M X
F
O L L O W S P O T
FS-2500 DMX
CAUTION! WARNING!
The top of unit gets ex-
tremely hot, watch where you rest your hands,
or objects that can melt or burn.
