Strong Enterprises STELLAR RESERVE Quasar, Руководство пользователя

Страница: 23 / 31

22
Quasar Owner's Manual
Strong Enterprises
CLOSING THE CONTAINER
32. Close the top sub-flap and lock it with a temporary pin.
33. Close the bottom sub-flap and lock it with a temporary pin.
NOTE: If a CYPRES AAD is being installed, the closing loop must be routed through the
hole in the release unit below this flap or the ADD will not function.
34. Route the pull up cord through the pilot chute and out of its #0 grommet in the top plate.
Now S-fold the bridle across the sub-flaps spreading it evenly to distribute the bulk.
35. With the pilot chute centered, compress it fully and lock it with a temporary pin ensuring
that no mesh or fabric is caught between the spring’s coils.
36. Spread the pilot chute’s canopy so
that it lies flat. Starting at the top, roll
the fabric down to the base of the pilot
chute and tuck it under the cap. Next
fold the bottom of the canopy up but
don’t tuck it under the cap like the top,
instead let it rest next to the cap to
serve as a cushion to help hide its
edge. Likewise, fold the sides in the
same manner as the bottom, letting all
of the folded material lie in a 1.5 to 2
inch space beside the cap.
37. Next, close the left side flap over the pilot chute and lock it closed with a temporary pin.
38. Now close the remaining right side flap and lock it closed with a temporary pin.
39. Using a packing paddle, insert the side flap tuck in tabs into the container under the
reserve canopy.
40. Insert the ripcord cable into its housing and route the pin out of the yoke through the
reinforced slot located just beneath the reserve top flap. Slide the RSL onto the cable and
then route the pin through the channel on the bottom of the reserve top flap until it is
protruding from the end of the flap.
41. Close the top reserve flap and lock it closed with a temporary pin.
42. Close the bottom reserve flap and lock it closed with the ripcord pin.
43. Insert the RSL into its pockets on the right front reserve riser.