31
Strong Enterprises owner’s manual. Para-Cushion
www.strongparachutes.com
8.4
Once the holes are cut, install the new
cap over the loop by aligning the loop
ends with the holes in the Spandura cap.
Pull the loop through the holes with your
hand tack needle.
8.5
Hand tack new cap in place at 90º angles
to the loops. Do this by going through pilot
chute top and through Spandura as close
to binding tape as possible. Tie off with
surgeon’s knot.
Note!
Be careful not to catch the pilot chute canopy cloth below the stitch
line at the top of the pilot chute. Doing so may result in stress being
put on the cloth resulting in a hole in the canopy.
