1.3
Warranty and liability
The "General trade and delivery terms and conditions of delivery" of Stromag always apply.
Stromag shall not recognise any warranty or liability claims for personal and material damage if they result from
one or more of the following causes:
• non-intended use of the GTES (see also "Intended use"), see section 2.3
• Failure to observe the information, instructions and prohibitions in this documentation
• unauthorised constructional modifications to the GTES
• insufficient monitoring of parts which are subject to wear and tear
• maintenance work performed improperly or too late
• catastrophic events caused by external influences or force majeure
1.3.1
Guarantee
The "General trade and delivery terms and conditions of delivery" of Stromag always apply.
1.3.2
Copyright
This documentation is a certified document as per the terms of the law against unfair competition.
The copyright is held by:
Stromag GmbH
Hansastraße 120
D-59425 Unna
Germany
This documentation is intended for the operator of the GTES and his personnel. It contains text and drawings
which, without the express permission of the manufacturer, must not be
• reproduced,
• distributed or
• made available to others in any other way, either in full or in part.
Non-compliance will result in damages being sought.
2 For your safety
2.1
Safety concept of the documentation
In accordance with the risk assessment carried out, the safety concept in this documentation is structured in the
following way:
• The general safety guidelines for the operator and the user are listed in this section.
• Section-related safety guidelines are listed at the start of the respective section.
• Safety guidelines related to handling must be followed before each safety-related work step.
3
Mounting/operating instructions Gear limit switch Type series HGE • No. 152-00000 F • 10/2017
