I N T R O D U C T I O N
Thank you for purchasing your
Strom-Electrical
electric water storage heater, we are very proud of our
products and we are sure that you will be happy with the years of service you get from your model. This
product has been designed to operate at mains pressure and deliver hot water to standard taps.
S P E C I F I C AT I O N
MODEL
SEUS6L/SEOS6L
SEUS10L/SEOS10L
SEUS15L/SEOS15L
Capacity
6 Litres
10 Litres
15 Litres
Body Material
High Strength ABS Casing
Voltage
220-240v
Power
2.0kW
2.5kW
2.5kW
Working Pressure
5 Bar
Minimum Inlet Pressure
0.2 Bar
Temperature Range
Maximum 65
o
C
IP Rating
IPX4
Control Mode
Manual Control Dial
Insulation Thickness
25mm
Water Connections
G1/2”
Dimensions
I M P O R TA N T N O T I C E
•
Your
Strom-Electrical
water heater
MUST
be installed and maintained regularly by a qualified
professional in accordance with current electrical and plumbing regulations.
•
The included Safety Pressure Relief Valve
MUST
be fitted in accordance with this manual.
•
Your
Strom-Electrical
water heater
MUST
be installed in the correct orientation in accordance with
page 5. The unit can be sited above or below the taps so long as it is in the correct orientation.
•
Do not operate your unit at a temperature greater than required, this increases lifespan and reduces
limescale build up.
•
Your
Strom-Electrical
unit
MUST NOT
be powered up until the unit has been filled with water and the
system has been flushed through to remove any airlocks and debris from the installation.
•
This unit has been designed to be fitted indoors in a dry environment, should there be a possability
that the unit or pipes may freeze please drain down the system and dont not resume operation until
the pipes & unit have unfrozen.
2.
