Stroco 15.00 M, Инструкция по эксплуатации

Страница: 10 / 38

INSTALLATION GUIDE/INSTALLATION PLAN
PAGE 10

The vehicle must have safety measures to ensure that no exhaust ends up in rooms where there are
people.

The exhaust pipe should be max. 4000 mm in length and should be 65 mm in diameter.
 If the heater is mounted in driver, passenger or storage room, this part of the fuel line must be
made from solid-drawn pipe steel. Connection to the fuel supply of the vehicle must be established
outside these rooms.
 If the heater is mounted in driver or passenger rooms, the air inlet must be led to fresh air.

The exhaust pipe should be made from a material that resists heat and corrosion
(AISI 304 SS 2333 alloy steel resistant to max. 800°C with at least 0.75 mm wall thickness).

Connections to the exhaust system must be tight and secured with brackets.

If the heater is installed in a cargo area, the exhaust must be made from an unbroken steel pipe.

After installation, the model plate must be accessible and readable.
 THE EXHAUST MUST BE ROUTED OUTSIDE OF THE VEHICLE IN HOSE OR PIPE.
There should be adequate room at the combustion end of the heater to remove the combustion unit
and combustion pipe. Minimum distances are shown in the illustration. We recommend mounting the
heater unit on vibration dampers. In this case, the heater connections should be made with flexible
hoses.