Operation
6 — 8
05_0186_0802GB
Note
Depending on the model, the material flow is switched on and off
using the material lever, the spray gun trigger or the remote control.
"
Close the material lever on the spray gun (if available).
"
Close the air valve on the spray gun.
"
Switch the machine on. Refer also to chapter:
”Starting up” -- section: ”Switching on the machine”.
"
Set the working pressure. Refer also to section:
”Setting the working pressure”.
"
Switch the delivery pump on. See also documentation provided
by the delivery pump manufacturer.
"
Open the air valve on the spray gun.
"
Start the material flow.
⇒
The spray gun is now ready for use.
Danger
Risk of injury from material sprayed from spray gun.
You must wear protective goggles!
Caution
Never disconnect the machine during operation.
Otherwise the machine may be damaged.
Continued next page
