Strobies Pro-Flash Tli-C Скачать руководство пользователя страница 6

Features

1. This flash unit uses a long-life Li-ion polymer battery

Available charge/discharge cycles - 500

2. Inner circuitry protects against overcharge, 

overdischarge, overcurrent, and short circuit.

3. Recharge times is less than 3 hours

 

when using the standard 

battery charger. 

Caution

1. Do not short circuit.
2. Do not expose to rain or immerse into water. This battery is not 

water proof.

3. Keep out of reach of children.
4. Do not leave the battery on the charger for more than 24 hours.
5. Store in dry, cool, ventilated places.
6. Do not put aside or into fire.
7. Dead batteries should be disposed according to local regulations.
8. Batteries lose their charge over time. If the battery has sat for 

more than 3 months without use, please recharge before using.

Loading and Unloading the Battery

Battery Level Indication

Make sure the battery pack is securely loaded in the flash. Check 
the battery level indication on the LCD panel to see the remaining 
battery level.

Meaning

Full

Middle

Low

Battery Level Indication

Blinking

Battery

1. 

4. 

Battery Charger Cable

 

5. 

Mini Stand

 

6. 

Protection Case

 

7. 

Instruction manual

What’s in the Box?

Flash unit

 

2. 

Li-ion Battery Pack

 

3. 

Battery Charger

 

Additional

 Accessories

 (Sold Separately)

The Pro-Flash TLi-C can be used in combination with the following 
accessories (sold separately), for a variety of different effects.
STR248 - Car Charger for Pro-Flash TLi-C/TLi-N
STR249 - Transmitter and Receiver for Pro-Flash TLi-C/TLi-N
STR177/178/179 - Speedlight Bracket and Softbox Kits
STR109 - Strobies Bounce Kit

-  07  -

-  08  -

1

2

To load the battery, push the 

1

battery compartment cover 
downward and open it. 

Battery power will be empty and need 

to be charged immediately.

2

According  to  the  triangle 
sign  on  the  battery  pack, 
insert  the  battery  into  the 
compartment  until  a  white 
knob locks the battery with a 
clicking sound.

To unload the battery, tap the 

3

white knob and the battery 
pack will pop out. Then close 
the compartment.

5

6

3

4

Содержание Pro-Flash Tli-C

















Отзывы: