Strobel 58-4, Руководство по эксплуатации

Страница: 22 / 30

18
BA_58_A17_161026_en
4.8.2
- The thread trimmer drive must be inserted as far as it will go into the needle
plate clamp.
Swivel the drive backwards so that there is a gap of about 1 mm between
the drive and the sewing head.
Adjustment (Fig. 8 and Fig. 9)
- The blade of the knife has until about 2 - 3 mm from needle lever, stand
forward, readjust if necessary.
Remove clamp 212.0486.
Loosen the screws 172.0312 and 175.0301 on the small gearwheel
240.0186 and adjust by turning the blade shaft.
Push together gearwheel and blade shaft to the limit and tighten.
- Setting the microswitch 397.0216 and gearwheel 240.0186.
- When replacing the rotary magnet 698.0695, ensure that the tooth gap
between the gearwheels is approx. 0.1 mm.
Ensure free movement of parts!
Fig. 9