C2. Mounting the machine in the travel case.
A travel case with wheels is available for transport of the machine. The main frame and turntable are
bolted on the plate which is fixed in the case.
* Before putting the machine in the travel bag remove the upper jaw and rotate the knob of the tension
handle 90 degrees.
* The machine is fixed on a mounting plate which is fixed in the travel bag with a bolt and 2 big
tiewraps.
The main frame and the turntable are fixed with 2 bolts each and clamped between delrin positioners to
avoid damage of the paint.
* The main frame and the turntable can not hit each other.
To create maximum support of the turntable make sure that it is supported on the edge of the bracket of
the tensioner and on the round support shown by the arrows on the picture.
Create this situation as follows.
