SAFETY INFORMATION
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
(cont.)
• Unplug the Charging Base before cleaning and when there is no Battery in the charger.
• Do not try to connect two chargers together.
• Do not allow liquid inside the Charging Base.
• Do not try to use the charger for any other purpose than what is presented in this manual.
• Save these instructions. Refer to them frequently and use them to instruct others who may use this Auger. If you
loan someone this Auger, loan them these instructions also to prevent misuse of the product and possible injury.
• Confi rm the voltage in each country before using the Charging Base.
• If the shape of the plug does not fi t the power outlet, use an attachment plug adaptor of the proper confi guration
for the power outlet.
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING
DANGER
Indicates an imminently hazardous situation, which, if not avoided,
will result in death or serious injury.
WARNING
Indicates an potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
CAUTION
Indicates an potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury.
CAUTION
(Without Safety Alert Symbol) Indicates a situation that may result in
property damage.
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
NAME MEANING
V
VOLTS
Voltage
Hz HERTZ
Frequency (cycles per second)
W
WATTS
Power
or d.c. DIRECT CURRENT
Type or a characteristic of current.
RPM
NO LOAD SPEED
Rotational speed at no load.
WET CONDITIONS ALERT
Do not expose to rain or use in damp locations.
SAFETY ALERT
Indicates a potentially personal injury hazard.
READ OWNER’S MANUAL
To reduce risk of injury, user must read and understand owner’s
manual before using this product.
04
05
KNOW YOU CHARGING BASE
The safe use of this product requires an understanding of the information on the product and in this owner’s manual
as well as a knowledge of the project you are attempting. Before using this product, familiarize yourself with all
operating features and safety rules.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
W A R N I N G
Changes or modifi cations to this unit not expressly approved by the manufacturer for compliance could void the
user’s authority to operate the equipment.
NOTE
: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING
Do not allow familiarity with products make you careless. Remember a careless fraction of a second is suffi cient to
infl ict serious injury.
WARNING
Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of
attachments or accessories not recommended can result in serious personal injury.
CAUTION
Charge in a well ventilated area. Do not block charger vents. Keep them clear to allow proper ventilation.
COOLING AIR PORT
ELECTRICAL CONTACTS
LED LIGHTS
POWER CORD
WALL
MOUNTING
HOLES
