40
Two or More Transmitters Pairing
Reset
The Receivers
Pairing is done per transmitter. Do you want to link more transmitters? Then follow steps 1 to 3 again.
This way you can pair the transmitters to the receiver one by one.
Press the forward button for 5 seconds to reset the receivers to the default setting. When the receiver
sounds “Ding Dong” with the LED indicator flashing, then the reset was successful. The setting is back
to default: the receiver comes back to the 1st melody and there is no transmitter paired anymore.
Insert the batteries into the receiver. Place the receiver on the designated spot. The receiver will work
right away. If the receiver does not respond, pair it again using the steps described on page 39.
RECEIVER AND TRANSMITTER INSTALLATION
IMPORTANT:
●
Test the doorbell range first before the installation of the transmitter.
●
It is not advisable to mount the transmitter onto metal surfaces as the material can
block RF signals between the transmitter and the receiver. However, if this is the
only option then we recommend that you use the 3M double-sided adhesive tape
provided as opposed to using the provided screws.
●
It is not advisable to mount the transmitter outdoors directly without any shelter
which could accelerate the aging of plastic materials.