27
Follow now these steps:
1
First connect the red clip to the positive (plus) pole of the battery.
2 now
connect the black clip to the negative (minus) pole of the battery.
3
Once both clips are connected to the car battery, connect the Battery Charger to the power
supply. The screen will start flashing after a few seconds.
4. Select the desired charge level using the mode button and then press the start button.
5. Once charging is complete, the charger will stop automatically. The screen will now flash again.
METHODE OF USE
Method of connection:
WARNING:
Before charging charging a battery permanently connected to the
vehicle, first disconnect the battery’s negative terminal connection cable
(black) from the negative battery terminal.
The negative battery terminal is typically connected to the car body.
Then disconnect the vehicle’s positive terminal connection cable (red)
from the positive battery terminal. Make sure all accessories in the
vehicle are turned off to avoid an arc flash.
Battery
Negative pole
Positive pole