© Strex 2021
STRE
X
Manual information
All rights reserved. No part of this publication may be reproduced, distributed, or
transmitted in any form or by any means, including photocopying, recording, or
other electronic or mechanical methods, without the prior written permission of the
publisher, except in the case of brief quotations embodied in critical reviews and
certain other noncommercial uses permitted by copyright law. For permission
requests at the address below.
SBD Trading B.V. (Strex Europe)
Noorwegenstraat 6-A4
7418BC Deventer
The Netherlands
[email protected] - www.strex.nl
Troubleshooting
Strip does not light on after
installation
Strip does not light on after
progamming DIY keys
2 Str
ips with different colors
Check the connector and if the
led strip has acces to power.
Check if the plastic film has been
removed on the remote.
Replace the battery remote.
Check if the shear connection is
correct
Check if the 2 strips are connected
in parallel